QualiJet HS

QualiJet TP - ink-jet printer for transfer paper

The Qualijet TP is a new high speed digital printer for transfer paper, based on the Mimaki Jv5, entirely developed and built in our factory in Italy, ideal for high quality production runs on a wide range of transfer paper substrates, up to 1.6 m. width a production speed well over 50 m2/hr. The QualiJet TP with its speed potential and colour control, combined with a competitive price and small footprint opens new opportunities to transfer paper printing.

+ 50 m2/h transfer paper ink-jet printer

Industrial scale transfer paper digital printing is finally made easy thanks the QualiJet TP. Top quality print results at production speeds of over 50 m2/h in 2x4 colour mode, 540x720 dpi. The ink-jet printer is delivered fully assembled, tested,, ready to print.

New print heads, speed, safety and quality

The QualiJet TP comes with the new extra wide variable dot Epson print heads. The distance from the print heads and the fabric surface is automatically controlled by a sensor. A sophisticated laser device checks on the fly each nozzle efficiency and prevents from print faults.

Accurate and heavy duty paper feed system

The QualiJet TP heavy duty feed, transport and rewind system ensures a perfect control over a wide range of paper substrates. The axial unwind and rewind unit can take heavy paper rolls on air shafts. The paper tension and alignment is always under control preventing bending and moiré effects at over 50 m2/h production speed.

Perfect ink drying

Perfect ink drying at full speed is covered by a triple surface heating zone, prior during and after the print area, and final drying with a double line of air fans. An optional additional infrared heater is available for particularly heavy conditions.

Open ink supply system

The QualiJet TP can print with all disperse and sublimatic inks compatible with the Jv5 Epson print heads, both from the standard 1.5 litres bulk feed system and from the optional Stork 2 litre cartridges feeder. An optional on-line ink-degassing system improves ink performances reducing cleaning cycles and ink waste by over 30%.

Quality and innovation

The QualiJet TP printers are manufactured with a visibly higher quality standard that can be perceived at first impact. A lot of substance and a long list of new ideas, with a tendency to perfection.

QualiJet TP technical data

MODEL QualiJet TP - Transfer paper
Printer Variable dot piezo print heads - based on Mimaki JV5
Print heads - COLORS 4 Epson piezo print heads - Each head 8 colours
Print heads LEVEL Automatic print head level adjustment from substrate: 0 -7 mm
Print head cleaning Print head cleaning Automatic print head cleaning cycle - automatic laser nozzles check
PRINT RESOLUTIONS 540 - 720 - 1440 dpi a 4,6,8 pass - mono & bidirectional (depending on software)
Paper transport Axial unwinder, powered axial rewinder, neumatic air shafts
Print width, roll size Maximum print width: 161 cm (63,3”) - maximum paper roll diameter: 30 cm
Print speed » 4 colours – 540x720 dpi – 4 passes – bidirectional – 54 m²/h
» 8 colours – 540x720 dpi – 6 passes – bidirectional – 32 m²/h
» 8 colours – 540x720 dpi – 8 passes – bidirectional – 29 m²/h
» 8 colours – 720x720 dpi – 8 passes – bidirectional – 25 m²/h
Ink feed system » Bulk feed with 8 x 1,5 liters tanks - optional online ink degassing system (default system)
» Bulk feed with 8 x 1liter bottles - optional online inke degassing system (charged extra)
» Stork bulk feed with 8 x 2 liter degassed cartridges (charged extra)
Inks Disperse, sublimation. - 4 colours: CMYK - 8 colours
Interface USB 2.0
Noise level < 50 db
Dimensions Width: 3,2 m - Depth: 1,30 m - Height: 1,5 m - Weight: 600 kg
Electric supply Printer: Ac200V - 240V - 50/60Hz - Axial rewind unit : Ac380V - 50/60Hz
Working environment Temperature range: 20-35 °c - Humidity 45-65 % rh

Contact: info@qualijet.eu